WTB: three MT Prop blades 175-17d

Buy, Sell. List your kit, plane, parts, tools, jigs, mounts, engines, avionics and things that can be used by others (or if you need specific items). As of April 1, 2018 all Classified are paid listings. There are options for listings on LancairParts.store and LancairsForSale.com depending on parts, aircraft or kits for sale. WTB ads are free. Contact admin for more information.
Forum rules
WTB(Want to Buy) ads are free. WTS(Selling) ads have a fee to support this site. List your kit, plane, parts, tools, jigs, mounts, engines, avionics BUT YOU MUST INCLUDE A PRICE. A fee of 1% of asking price per month applies but that is capped at $25 maximum monthly. Example $300 part is $3. An airplane would be $25.
Contact admin for more information. Make your payment directly using the PayPal button. Thank you!

WTB: three MT Prop blades 175-17d

Postby Bob Mackey » Tue Jan 12, 2021 2:48 pm

Wanted:
Three MT prop blades part number 175-17d to fit a MTV-12-B hub.
Could also use 175-59d, 175-33, 173-402, or other blades to fit the MTV-12-B hub.

Or maybe a different good deal on a complete prop and spinner to fit a 200HP IO-360

-Bob Mackey
User avatar
Bob Mackey
235_O320
 
Posts: 474
Joined: Fri Mar 21, 2014 8:08 am

Re: WTB: three MT Prop blades 175-17d

Postby Steve Cantarutti » Tue Jan 12, 2021 4:57 pm

Bob

Guessing you have spoken with a MT dealer such as Tiffin in Ohio.
How much are they asking for blades these days?
Are you sure you have clearance for 175 cm blades?
For reference, my 235 has 155 cm blades and I have 8 inches ground clearance.
Lancair 235/340
RV-9A ( 2013 - 2016 )
User avatar
Steve Cantarutti
titan
 
Posts: 1170
Joined: Sat May 31, 2014 9:27 pm
Location: FAA:0A9 East TN

Re: WTB: three MT Prop blades 175-17d

Postby Jake Wolfe » Wed Jan 13, 2021 3:03 am

Had the MTV-12B-175-17d on my 360 and 8" ground clearance with the nose strut fully compressed.
User avatar
Jake Wolfe
IV-P
 
Posts: 151
Joined: Fri Aug 07, 2020 6:45 pm
Location: KRYN

Re: WTB: three MT Prop blades 175-17d

Postby Erno Ovari » Wed Jan 13, 2021 10:42 am

Look at ya'll showing off with your 8 or 10 inches clearances.
20200907_092731.jpg
2 inches prop clearance

20200907_092751.jpg
2 ounces prop clearance


I measured this clearances for the case the nose strut deflates. Once I add oil & pressure in it it generates a clearance of 4 - 5 inches (with this prop)
User avatar
Erno Ovari
360
 
Posts: 598
Joined: Thu Jul 03, 2014 4:58 am
Location: FAA:U42 South valley - South of Salt Lake City, Utah


Return to Classifieds

Who is online

Users browsing this forum: No registered users and 10 guests