WTB: three MT Prop blades 175-17d

[Bob Mackey]

Wanted:
Three MT prop blades part number 175-17d to fit a MTV-12-B hub.
Could also use 175-59d, 175-33, 173-402, or other blades to fit the MTV-12-B hub.

Or maybe a different good deal on a complete prop and spinner to fit a 200HP IO-360

-Bob Mackey

[Steve Cantarutti]

Bob

Guessing you have spoken with a MT dealer such as Tiffin in Ohio.
How much are they asking for blades these days?
Are you sure you have clearance for 175 cm blades?
For reference, my 235 has 155 cm blades and I have 8 inches ground clearance.

[Jake Wolfe]

Had the MTV-12B-175-17d on my 360 and 8" ground clearance with the nose strut fully compressed.

[Erno Ovari]

Look at ya'll showing off with your 8 or 10 inches clearances.

2 inches prop clearance

2 ounces prop clearance

I measured this clearances for the case the nose strut deflates. Once I add oil & pressure in it it generates a clearance of 4 - 5 inches (with this prop)